I purchased a silver skid plate but they sent me instructions in Korean and I only speak english. I have a 2012 Sportage EX (US Version). Can anyone help me in finding instructions for installing this?
Magarians
I fitted the factory skid plates myself. They are supplied with 3M cleaning and bonding solutions, a template to help you fit the plates in the right position and clips. First you have to clean the surface and then apply the bonding solution. Leave for 15 minutes to dry then using the template you fit the plate. The plate has 3M bonding tape on the back also. Then you need to drill holes to fit the clips. These are underneath the car and the hold one end of the plate. Atm i don't have pics available but i think if you login Kgis you might find something.
The most difficult one is the rear one as you have to find the best place to fit it as you have to use the template. Not as the front one where part of it fits in the vent opening and there is no place other than that.
The most difficult one is the rear one as you have to find the best place to fit it as you have to use the template. Not as the front one where part of it fits in the vent opening and there is no place other than that.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
