I purchased a silver skid plate but they sent me instructions in Korean and I only speak english. I have a 2012 Sportage EX (US Version). Can anyone help me in finding instructions for installing this?
Magarians
Joined
·
200 Posts
I doubt it. I fitted a front skid plate on Saturday. The same one as in the pictures on the Spanish forum. It is made in Germany, so may differ in detail to the Korean version.
One thing that wasn't mentioned but is relevant if you live in a colder climate, is that the primer supplied takes 15 minutes to dry at a minimum temperature of 18°C (65°F) and that pressure needs to be applied to the areas over the double sided tape for two minutes after application.
I couldn't get the centre pin to push into those 4mm plastic rivets so I screwed a 1/2" #4 brass screw into them instead. It seems secure enough.
One thing that wasn't mentioned but is relevant if you live in a colder climate, is that the primer supplied takes 15 minutes to dry at a minimum temperature of 18°C (65°F) and that pressure needs to be applied to the areas over the double sided tape for two minutes after application.
I couldn't get the centre pin to push into those 4mm plastic rivets so I screwed a 1/2" #4 brass screw into them instead. It seems secure enough.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
