Kia Forum banner

1 - 8 of 8 Posts

·
Registered
07sedona lx 2000 nubira 74 beetle 86 cbr1000 honda 93 harley lowrider 94 trooper 72 scimitar
Joined
·
483 Posts
Discussion Starter #1 (Edited)

·
Memorial Super Moderator
2005 Kia Cerato LD [2L petrol] manual, 1986 Nissan Pulsar hatch
Joined
·
2,861 Posts
Very good link , it should be handy for some members. Now all you have to do is find that Bentley and away you go.:) I have made the thread a sticky so more members can view it.
 

·
Memorial Super Moderator
2005 Kia Cerato LD [2L petrol] manual, 1986 Nissan Pulsar hatch
Joined
·
2,861 Posts
I don't know what will fit but before trying anything with the Honda springs you would have to find out the spring diameter, poundage rating[ rebound etc] because even if they phyically fit you need to match the spring to the strut etc otherwise you get very strange handling at the least, dangerous handling at the worst. Reseach, research, research. :cool:
 

·
Registered
Sedona 04 2.9
Joined
·
24 Posts
Had a look at this link and found another website with some alloys for sale from a Carens, they are supposed to be the same stud pattern, 17 inchs but im not sure of the offset im assuming i would have to spacer them outwards but does anyone know the offset of the carens to the sedona?
 

·
Registered
Specta SX 2006
Joined
·
1 Posts
Any idea if I can put on 205/55/16s on my 06 Spectra SX? Stock is 205/50/16. I can't seem to find a straight answer here. Thanks!
 

·
Super Moderator
2016 FIAT 500X Trekking Plus AWD; 2016 Kia Forte5 SX 1.6T A/T
Joined
·
6,807 Posts
yes, you can. It will be lower so speedo will read a little off, besides lower profile means three things: more response, harder ride, easier to bend rims.
 
1 - 8 of 8 Posts
Top