Kia Forum banner
1 - 3 of 3 Posts

· Registered
car
Joined
·
4,357 Posts
This is what I found on another website.........
basically gotta take the panels where the automatic shifter is off i didnt find any screws holding them on, they pop off with a little force, then there's two screws underneath there holding the panel where the stereo is and that then pops off with a little force, there's a few wires holding it on then one for the clock and the hazard signals that i couldnt get off easily, i also had to turn the car on and put the shifter in neutral cause the shifter was in the way to get the panel out enough to move it... then theres 4 screws holding the stereo in that feels like their soldered in there...and getting the connector out of the back of the radio again took quite a bit of force... might be worth it to just have it installed took me about an hour of slicing my fingers and such...

Sorry to hear you broke your console. Good luck.
 

· Registered
car
Joined
·
4,357 Posts
Originally posted by JADPhD@Feb 21 2005, 03:49 PM
MISSION ACCOMPLISHED! I was able to get the stereo out, my XM Commander wired in and the whole thing is installed and working perfectly. Thanks much! :)
Glad to hear you got it installed! :)

oaphillips,
check out the link below from crutchfield.com
I believe www.ebay.com has them too.
cruthfield.com
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top