Kia Forum banner

1 - 4 of 4 Posts

·
Registered
2011 Kia Sorento
Joined
·
7 Posts
Discussion Starter · #1 ·
I carefully pried the switch out of the door panel, then took the switch apart and found that the contacts were burnt. I sanded them with fine sand paper to shine them up and now the door release works like new.
 

Attachments

·
Registered
Joined
·
1 Posts
I carefully pried the switch out of the door panel, then took the switch apart and found that the contacts were burnt. I sanded them with fine sand paper to shine them up and now the door release works like new.
thanks for this. I was able to pry the button out with some effort if finally came up. But how do we open the button itself? I do not want to try to pull it apart for fear of ripping the wires off. Dies it twist open maybe? Thanks.
 

·
Registered
2013 Sorento Ex V6
Joined
·
293 Posts
I carefully pried the switch out of the door panel, then took the switch apart and found that the contacts were burnt. I sanded them with fine sand paper to shine them up and now the door release works like new.
Good one!!!
 
1 - 4 of 4 Posts
Top