Kia Forum banner

1 - 2 of 2 Posts

·
Registered
2-2000 1-2006ALL SPORTAGES also 96 dodge van to transport dogs and 84 gmc snow plow.
Joined
·
340 Posts
Welcome ; had the same problem. I removed the the plastic elbow drilled and tapped the hole i think i used 1/4 pipe thread. I used brass 90 degree fitting and a 5/16 or 1/4 slip on fitting securing it with a screw on hose clamp.
Removing the fuel pump was a real challenge the retaining screws where very rusty.
Chief
 
1 - 2 of 2 Posts
Top