Kia Forum banner

1 - 3 of 3 Posts

·
Registered
2016 Kia Rio
Joined
·
1 Posts
Discussion Starter #1
So I changed all turn signal bulbs to led but know I have hyper flash. I bought 50a/6ohm resistors and only installed one side to see if hyper flash would go away but still had the hyper flash. Do I have to connect all 4 resistors to eliminate hyper flash?
 

·
Super Moderator
99 Kia Elan 1.8L, 17 Ford Edge Sport 2.7L V6, 15 Mustang 3.7L V6, 08 Harley Nightrain
Joined
·
10,965 Posts
So I changed all turn signal bulbs to led but know I have hyper flash. I bought 50a/6ohm resistors and only installed one side to see if hyper flash would go away but still had the hyper flash. Do I have to connect all 4 resistors to eliminate hyper flash?
Using the below link, please add location and vehicle (year & model) to your User Account/Profile

eg.
USA
2019 Sportage 2.7L V6 SX turbo AWD


UPDATE: Vehicle Information


Forum Rules


Tip: after updating your info, hit “like” on this post, and it will serve as a prompt to remove it.
 

·
Registered
Drives : Nissan NV200 Flies : Rans S6ES
Joined
·
130 Posts
Do I have to connect all 4 resistors to eliminate hyper flash?
If you have installed resistors in parallel with (across) the front & rear turn signal LEDs on one side of the car there should be no hyper flash on that side.

 
1 - 3 of 3 Posts
Top