Kia Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi guys, I am having some trouble with my Shuma. The break pedal feels spongy and it only breaks on one wheel (the right one), I have checked the break fluid level and it is not loosing any fluid. I tried checking the movement of the break pad and both the left and right pads move but the left one does not move that much. What do I need to do to fix this?
 

· Registered
Sportage 2.0L Turbo Diesel (2001), Hyundai Tucson 2.0L (Petrol), Toyota Corolla 1.3L
Joined
·
6 Posts
Your brakes is most likely corroded so, so you need to clean them. Take of the pads, clean for rust, and if you have possibility to get hand on Zink-spray, spray metal with the zink-spray. I've done that on brakes for years, and never had problems.

Spray I use is simular as this: http://www.noxudolusa.com/noxudolstore/ccp0-prodshow/NZINK.html

Some before and after pictures:







 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top