Kia Forum banner
1 - 20 of 59 Posts

Automotive Lighting Experts
462 Posts
Discussion Starter · #1 · (Edited)

Kia Fog Light LED Bulbs

We carry LED bulbs for replacement of your Kia's fog lights or DRLs, in all major sizes. They are available in several bulb models. This will make your fog lights a nice bright white, without the hassle of HIDs! Just simple plug and play, replace the bulb and you are good to go!

We carry the brightest, highest-quality bulbs at the lowest prices. Your order will ship same day, and we're here if you need us for support and service. And we do not jack up the prices to astronomical levels- We're breaking that market trend, and offering you great, low prices, every day. These LED bulbs are designed by us here in St. Louis, and every bulb carries with it a three-year limited warranty.


Diode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.

HP48: 265 lumens. Slightly lower brightness than factory.
XP80: 510 lumens. Similar brightness to factory.
XML2: 1420 lumens. Much brighter than factory. These are bright!

*XML2 is available in 3000K Yellow / 4000K / 5000K / 6000K Color Temperatures

Bulb Design

HP48: This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

XML2: Two opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design.

Included in your order is TWO BULBS (to fit your Kia).

All of our products come with a 30-day satisfaction guarantee and a 3-year limited warranty.

Click your vehicle below for more information and/or to order:

Kia Amanti Fog Light LEDs (pair)

Forte LED Fog Lights

Forte Koupe LED Fog Lights

Forte 5-door LED Fog Lights

Kia Optima Fog Light LEDs (pair)

2006-2007 Kia Optima Fog Light LEDs (pair)

2008-2010 Kia Optima Fog Light LEDs (pair)

2011-2013 Kia Optima Fog Light LEDs (pair)

Kia Rio Fog Light LEDs (pair)

Kia Rio 5-Door Fog Light LEDs (pair)

Kia Rondo Fog Light LEDs (pair)

Kia Sedona Fog Light LEDs (pair)

2003-2006 Kia Sorento Fog Light LEDs (pair)

2011-2012 Kia Sorento Fog Light LEDs (pair)

Kia Soul Fog Light LEDs (pair)

Kia Spectra Fog Light LEDs (pair)

Kia Spectra5 Fog Light LEDs (pair)

2005-2010 Kia Sportage Fog Light LEDs (pair)

2011-2012 Kia Sportage Fog Light LEDs (pair)

Any questions, feel free to ask via email ([email protected]), Post or shoot us a PM!

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!

Nick C.
Diode Dynamics

2013 Sportage turbo (SX model in US)
209 Posts
thank for info. but I regret when I installed it. it was different brand LED fog lamp (6000K). light doesn't spray over unlikely traditional halogen bulb. if it is very foggy weather, it won't even get through fog. you become a blind. trust me. I tested everything for fog lamp. color temperature is also very important. 6000K doesn't work well for foggy day. if you want to get it, you should choose halogen over LED. color temperature is adequate between 2800-3500K. recently I changed fog lamp with 2800K. it is great, light spray is very well. as a matter of fact, yellow offers great visibility. if you know about color temperature, you should know. 6000K is better choice for main lamp (low and high). fog lamp works totally different.
1 - 20 of 59 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.