Kia Forum banner
1 - 11 of 11 Posts

·
Registered
Kia Soul 2010
Joined
·
7 Posts
Discussion Starter · #1 ·
Hello guys, I need info, specs and PN for exhaust flange bolts / screws
I am talking about the flange between the calayser and resonator.
What size are they, are they metric or imeprial, what thread step they have... quite any info you know about them.
Thanks a lot
 

·
Registered
Kia Soul 2010
Joined
·
7 Posts
Discussion Starter · #2 ·
Also, where I can buy them with reasonable shipping charges... or any other info, thanks again
 

·
Super Moderator
1995 Procharged Mustang Cobra, 2021 K5 GT Line
Joined
·
4,777 Posts
It would help IF we knew what year, engine size, soul you have.....
 

·
Registered
Kia Soul 2010
Joined
·
7 Posts
Discussion Starter · #4 ·
Hi,
I need info, specs and PN for exhaust flange bolts / screws
I am talking about the flange between the catalyser and resonator.
What size are they, are they metric or imperial, what thread step they have... They are a special type, maybe you know how it's called, I need quite any info you know about them.
Also, where I can buy them with reasonable shipping charges.
Thanks a lot
 

·
Moderator
99 Kia Elan 1.8L
Joined
·
12,056 Posts
It would help IF we knew what year, engine size, soul you have.....
Hi,
I need info, specs and PN for exhaust flange bolts / screws
I am talking about the flange between the catalyser and resonator.
What size are they, are they metric or imperial, what thread step they have... They are a special type, maybe you know how it's called, I need quite any info you know about them.
Also, where I can buy them with reasonable shipping charges.
Thanks a lot
What engine, 1.6 or 2.0 ?
 
  • Like
Reactions: RedNic

·
Registered
Kia Soul 2010
Joined
·
7 Posts
Discussion Starter · #6 ·
Hi,
I need info, specs and PN for exhaust flange bolts / screws
I am talking about the flange between the catalyser and resonator.
What size are they, are they metric or imperial, what thread step they have... They are a special type, maybe you know how it's called, I need quite any info you know about them.
Also, where I can buy them with reasonable shipping charges.
Thanks a lot
Kia soul 2U 2010 2litters
 

·
Registered
2011 Hyundai ix35 AWD CRDi
Joined
·
439 Posts
Could be M12 x 1.25 thread. Don't remember if it's 17 or 19mm across the flats.

Mitsubishi MB059359, MAZDA 9994-01-200 ,

KIA OK52Y40355

Font Screenshot Rectangle Number Brand



286792B000

Font Nail Auto part Plastic Cylinder
 

·
Registered
Kia Soul 2010
Joined
·
7 Posts
Discussion Starter · #11 ·
Thank you Grerard 2.
I looked at them when the mechanic took them out and clean them, they seamed to be 10mm (could be 12 too as you said)... but they have very fine thread, i'd say half a mm or half of 1.25mm. They have a special shape, kind'a no head, 2 sections of thread one screws in the flange and the otherone (same thread) has a very thin nut screwing on it.
I'd be happy to find the bolts and the screws as a set or so.
Thanks
 
1 - 11 of 11 Posts
Top