Kia Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
:57: Hi evryone, Bodyman here, I joined to get some engine help. To earn my keep, I will try to answer q's on things other than engines and tranny's. I have to take my kids fishing now so I'll be back later to see if I can lend someone a hand. Tom
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 ·
Hello there fast guy, If you are painting over factory paint there is no reason to go to bare metal or to the factory primer. Just give the old factory paint a good sanding with 600 grit on a block. this will help you find any hidden low spots. If you are going over aftermarket paint with bondo under it or old beat up factory paint sand all the way down. If it is old bondo (over 5 yrs. ) Replace it. I don't really know how "SHOWEY" you want to get, just remember patience is the key and it's harder than it looks. Good luck!!! I hope this helped If you need more detail just ask and try to help. My engine problem is posted under Bodyman ISO gearhead. Tom.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top