Kia Forum banner

1 - 1 of 1 Posts

03 Sorento EX
11 Posts
Discussion Starter #1
I have a 03 Sorento. I noticed a growl coming from the front left wheel. I ran it by 2 differnt shops and they agreed that it was the bearing. I replaced the cv shaft and the hub bearing and seal. Still have the noise. I had them press another bearing and had the same noise. Took it in a third time and the machine shop agreed that the noise is coming from the left bearing.

Is there a procedure that I'm not following when i tighten the wheel nut?
I've tried going to 160 Ft-lb and back a little, 180 ft-lb and back a little and finally 198 ft-lb.
1 - 1 of 1 Posts