Kia Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
349 Posts
If the ECM is still flagging a bad camshaft position sensor then I would suspect the wiring between the sensor and the ECM. I have that section of the electrical manual. Send me an e-mail at [email protected] and I'll forward it to you.

Just keep in mind that the data I have is for LEFT hand drive. It might be different for RIGHT hand drive.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top