Kia Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Ok guys:

Let me start by introducing myself to the forum. I am a owner of a 2004 Stratus Coupe. Yes I know I am out of my territory. Now my car has the Mitsu 4g64 motor 2.4L. In the forum that I normally hang out in there is a discussion from a former Kia tech, that the DOHC head will bolt onto our 4g64 blocks. we have compared head gaskets and they match. The cam sensor is pretty much the same as a Lancer Evo. So I was wondering if you guys could help me out. I was wondering if someone could post or point me to the right direction of pics of a 2.4L DOHC either complete or torn apart, torn apart would be best that way I can look at bolt holes and all. The reason we started this thread on Club3g.com is because DOHC is very beneficial to us when we boost our motors.

I think it would be rather cool if it is possible to swap parts such as that. Please let me know.

AIM: Speedbagr
 

·
Registered
Joined
·
107 Posts
if its a 2.4L Dohc then chances are your looking at an Optima head, talk with that tech to find out what year. That tech should know.
 
1 - 2 of 2 Posts
Top