Kia Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
I have a 2006 Kia sorento. I have everything torn down to get at the crank position sensor under the lower timing cover. I noticed the left screw on the sensor is behind the timing belt. I don't need to replace the timing belt at this time. Is there an easy way to hold the timing belt in place while I remove the tensioner on the belt and replace the sensor?
 

·
Registered
Joined
·
8 Posts
all i can offer is i know this is possible as i had that sensor changed by a mechanic without him replacing the belt. good luck.
 
1 - 2 of 2 Posts
Top