Kia Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
71 Posts
It's actually not to hard of a job to change the plugs.
The first thing you have to do is dismantle the intake that runs right over the Valved head. Once This has been removed you need to remove the plastic rectangular cover in the center of the head by the undoing the bolts surrounding it [I forget how many there are]
(The spark plugs are located directly under that plastic piece you remove)

Sorry, this response wasn't very detailed. I'm sure that someone else can probably give you much better directions, however at least you should have more of a sense of direction then you did before.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top