Kia Forum banner
1 - 1 of 1 Posts

2 Posts
Discussion Starter · #1 ·
Anybody have any experience removing the bell housing (clutch housing) from the transmission on an 06 Rio5?

We replaced the clutch a month or so ago but it continued to slip. So we took it apart and figured out that the input shaft seal is leaking on the transmission and need to replace it. However it appears that the bell housing needs to come off of the transmission to get to the seal.

I have looked thoroughly through the Kia Tech Site but there are no instructions for seperating these two.

Thanks in advance for your help.

1 - 1 of 1 Posts