Kia Forum banner

1 - 6 of 6 Posts

·
Registered
2013 Rio SX Hatchback
Joined
·
417 Posts
Discussion Starter #1
Hey all, does anyone have pictures of the back of the UVO head unit (non-nav). I'm specifically wanting to know what kind of input/output connections there are. For example, any RCA connectors or pre-amp out or sub connections. Or maybe someone has a link to this info on KGIS. Thanks
 

·
Registered
Kia Rio S UB 2012
Joined
·
94 Posts
did you try to look on the KGIS website at all ? All the info should be there.

My Kia Rio S has the stock radio which has no RCAs or any markings etc, I had to find the info on the above website to tap into the signal for the speakers to re-route into my new amp.
 

·
Registered
2013 Rio SX Hatchback
Joined
·
417 Posts
Discussion Starter #3
did you try to look on the KGIS website at all ? All the info should be there.
I find the KGIS site almost impossible to navigate. That's why I asked if anyone had a direct link. Or simply a photo of the back of the unit.
 

·
Registered
2013 Rio SX Hatchback
Joined
·
417 Posts
Discussion Starter #5

·
Registered
Kia Rio S UB 2012
Joined
·
94 Posts
a photo of the back of the head unit would not help you. As I said, there are NO other connectors than the 2 stock ones which carry all the signals and radio antenna.

my link shows you one of the connectors which has all the cables with speaker wiring which is all you need to get a signal into an amp.
 
1 - 6 of 6 Posts
Top