Kia Forum banner
1 - 4 of 4 Posts

· Registered
19 Posts
Discussion Starter · #1 ·
I need a wiring harness adapter for my 1999 Sephia. I have checked all the local automotive stores. I found that Scorche has one, but I cannot order it from their site. The car does not use the EIA wiring standard... Any suggestions?

· Registered
16 Posts
Hi Dano,

Are you talking about what-wire-does-what as far as the radio is concerned? If so, I just installed a deck into my 2000 Sephia and I figured out what the wires all are (well, except for two of them).

green, no stripe -- power (ignition)
black, no stripe -- ground
pink, no stripe -- constant 12V
white w/ green stripe -- front left, pos
white w/ black stripe -- front left, neg
yellow w/ red stripe -- front right, pos
yeloow w/ no stripe -- front right, neg
brown w/ green stripe -- rear left, pos
brown w/ black stripe -- rear left, neg
green w/ yellow stripe -- rear right, pos
orange w/ black stripe -- rear right, neg
blue w/ white stripe -- no idea
green w/ black stripe -- no idea

Your deck should work even without the last two connected -- if you figure out what they are let us know :)

-- Evan

· Premium Member
2015 Buick Verano "Leather Group", 2015 Kia Optima Hybrid
6,196 Posts
yep it ha like a clip thing on it.

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.