Kia Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
349 Posts
The camshaft position sensor is located on the backside of the head, driver's side, and obtains it's signal from the exhaust cam. It is very difficult to see. It is bolted to the backside of the head and has an electrical connector.

It is very tight back there and probably is going to be difficult to remove. Hope this helps.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top