Kia Forum banner
Showcase cover image for My 2015 Hyundai Accent GLS

General Information

Basic as you can get.
Bought her new with 17 miles on the clock.
Once daily driver now project car with turbo motor swap in the works.


AEM cold air intake with K&N filter.

Evilla 2 point front subframe brace.
Evilla x-brace subframe brace modified.

FuelLab 10 micron fuel filter

Custom 3 point trunk brace made from a Lincoln Mark IV strut bar.

Evilla rear torsion bar bought from Pierce MotorSport.

SxthElement lightweight NST water pump and crank pulleys.

Chase Bays 20 oz 6061 billet windshield washer fluid tank.
Chase Bays 6061 billet 32oz overflow coolant tank.

KDMTuners billet/ baffled higher capacity reservoir racing oil pan for the turbo motor swap.
Quaife lsd for Turbo transmission.
2014 Turbo R-Spec 6 speed manual tranny for the swap.
2014 Turbo R-Spec ECU for the turbo swap.

Setrab 19 row oil cooler w/ integral cooling fan, Setrab isolation mounting bracket, Mishimoto high flow sandwich plate w/ 160 degree t-stat.

Canton Racing Accusump 1qt pre-Oiler with valve and dash mounted switch.

Elantra 60mm throttlebody.
Throttlebody coolant bypass.

Triple catch can using 2 Mishimoto and one SAIKOUMICHI Catch cans-all vented time air.

SoCalGarage Delrin shifter cable bushings by

Upgraded grounding and battery wiring.
Flaming River battery kill switch set to NHRA/ IHRA and SCCA compliance.

SxthElement lower racing dog bone engine mount using 85 durometer bushing.

TurboTechRacing upper engine racing mount.
Torkon rigid collars from KDMHolic.
Whiteline adjustable sway bar end links from Evilla MotorSports.

Moog camber bolts.
NRG gen2 quick release.
NRG short hub adaptor.
NRG reinforced steering wheel.
Torque Solution billet 3" shifter extension.

SoCalGarage billet shifter bushings.
Dewhel shift boot adaptor-modified for reverse lockout.

SickSpeed gold weighted shift knob.
Ultragauge OBD2 gauge.
OnlineLedStore 4 gang switch box.

Holley stand-alone CanBus programmable led shift light hard wired.

AutoMeter gauge pods mounted on dash cowl.

2.5 pound BC fire extinguisher for safety and track use. Hope I never need it. 😂😳
MidTown Company billet front seat quick release fire extinguisher mount.

Corbeau Forza fixed back racing seats on Corbeau modified Toyota sliders.

Weather tech front floor mats.
Sparco aluminum pedal set-hard mounted.
Subaru aftermarket lip installed on front bumper lip.

Korean OEM factory rear spoiler painted factory white.

KDMHolic lower led rear bumper lights.
Custom led side marker lights front and rear.
Modified lower front upper and lower grill to allow more air flow to the radiator, oil cooler, and future fmic.

Functional corner non fog light openings for air flow to cai and oil cooler.

Verus Engineering '15 Ford Fiesta ST hood louvers from Whoosh MotorSports.

Rennline steel front tow hook hard mounted to crash bar.

Rear 10mm Billet rear tow hook.
Exhaust screaming and lots of NVH is my symphony. 😂🤷🏼‍♂️😉
All led converted inside and out.
Evilla Motorsports mid cat delete pipe.
Custom axle back.
H&R springs for now and have DGR coilovers ready to install once I'm done with my drum brake to disc brake beam axle swap.
Wheel and Tire
Konig Rewind rims with 15x7 size and 40 offset 14 pound weight each.

Yokohama S1 summer tire with 205/50R15 size.
McGard wheel lug with red tips.
H&R springs

949Racing billet valve stems in red


There are no comments to display.