kia sedona where pass wire for Flip-down LCD/DVD

[lermure]

hi,

first, i have use search and didnt find any answer for what i seek. so sorry if its have already been answer.

Ok, so i have buy a 15" DVD/LCD flip-down player to add to my :

Kia Sedona 2006 LX model.

I want to know where i can connect this DVD before passing wires in the roof. Also there is on the net a PDF diagram or information about wires in kia sedona 2006? There is a easy way to connect this?\

On the LX model, i see un-use button that i think is for the DVD player of the kia sedona EX model. Maybe wires connexion already there and can be use to connect a custom DVD player that is not from KIA?

I want to make a clean connexion of this in my kia.

Thanks for answer.

[a9xs]

when i install these aftermarket dvd players at work i ground them where the studs are for the dome light assembly and run the power wire up to the roof mount center console where if your van is equipped with power sliding doors there is a green wire at the front center console to tap into to get your power source from. otherwise if you dont have power sliding doors run the wire to the A pillar and down that way by the fuse box and find a power source under the dash there like maybe in the main ignition harness.

[lermure]

thanks for answer.

I was thinking if i can use the same power cable then those that are use by roof light?

I suppose all light are on 12v also, like the roof dvd player i have buy?