Double Din Kia Rio

[ACQ]

here are some photos of my car. i am really sorry for delay.

[ACQ]

Originally Posted by Semedar

Oh damn. Would an aftermarket stereo work with the iPod USB and AUX plug that's already installed?

you will need to replace the entire console where the usb and aux goes. I take it out and pasted the cable that came with the new pioneer stereo but is a really hard work. now i need to buy another extension to remove all cables and installa the cable for apps mode.
Let see how does it work.?

[ACQ]

btw, for those who their cars are have basic stuff, i also added a rear view camera and reverse sensor (white dots at the right side sub-woofer pictures) for less than 100 bucks everything was bought on eBay!! jeje and works great

[pauliii]

ACQ, i buy the 8400BT with the new console, but the original USB and Aux dont work with the 8400T pioneer? where did you bought your armset? is this the original for kia rio ?

[ACQ]

Originally Posted by pauliii

ACQ, i buy the 8400BT with the new console, but the original USB and Aux dont work with the 8400T pioneer? where did you bought your armrest? is this the original for kia rio ?

You will loose the aux, because the only way i found to to take out all the electric piece in the back of the connectors and paste with a glue the new female USB port coming from the screen. If you only use the USB with your iPod, you will loose the video option. but in your radio you have 2 USB port so buy the CD-IU201S and place it on your car compartment.

The armrest isnt the original so y made a custom box to place it, the seller on ebay sent to me the one for the Kia Soul, now is available the original but you will need to create the external case to place it. (i will try with generic one). I try to buy the entire center console but is not available at this moment.

[pauliii]

Hi ACQ, i recieve the integration kit , the pioneer 8400BT, with the pioneer KI.A RIO 114 and Pioneer CD-IU201V, however, i want to remove the original dash board and i dont know how to remove it, can you put some pictures or send me videos to show me how to remove it for putting the new dashboard with the double din! thank you man, if you want, you can send me by inbox all the informations ( pauldaou@hotmail.com )

[pauliii]

ACQ, APxwingman , hy mens, i just want to know how to remove the original dasboard and for the rest i will do it alone! I dont think that the PAC modul work with the pioneer 8400BT ! it's not the PAC modul but the (Pioneer CA-R-KO.00C) !

[ApXWingman]

you should be able to take a small knife or something to use to pry it off. Start off at the top where the vents are. Just pry it off in a couple places and the rest should come off by hand

[pauliii]

ApXWingman, can you take some photos please ? i'm afraid to break or cross off the dashboard so please, i just want photos or videos for removing the dash board! i dont found on the internet !!

[ACQ]

Originally Posted by pauliii

ApXWingman, can you take some photos please ? i'm afraid to break or cross off the dashboard so please, i just want photos or videos for removing the dash board! i dont found on the internet !!

Hi pauliii , sorry for delay response. i am assuming that you already install your new dash and stereo.

Just to clarify, the only reason PAC module didn't work in my car is because cars shipped to USA and Latinamerica dind't have the same specs or accessories.

I finally installed an Axxis automatic module on my car and it work perfectly. my car has the same cable configuration than the USA Hyundai Elantra.