View Single Post
Old 01-01-2008, 09:25 AM   #7 (permalink)
Spec SX
Super Moderator
 
Spec SX's Avatar
 
Join Date: Dec 2004
Location: St. Albans, Vermont
Posts: 4,148
Drives: 07 Sorento LX & 07 Rio LX
Gallery: 0
Default

for some reason when the site migrated over to this new format we lost some stuff. Here ya go.

1. First remove the two pieces of trim pointed out in red. Start off at the bottom using a small puddy knife. Once you can get your fingers behind it you can pull it off that way. It may feel like you are going to break it but you wont.

2. Once they are removed you will need to remove that big piece pointed out in the white arrows. There are screw for that on the top of the dash and down the sides of it. You cant miss them.

3. Once all of the screws are removed remove that piece but be carefull because you will need to unplug your clock and your heating controls.

4. After that you will be able to see the 4 screws that hold your radio in place.

Good luck and if ya have any more questions feel free to ask away.
Attached Images
File Type: jpg HeadUnit.jpg (40.6 KB, 191 views)
Spec SX is offline   Reply With Quote