Kia Forum - View Single Post

93fxdl · 09-17-2007, 04:46 AM

no if the bearing is gone you only need to change that one whilst you have the jack an stands out check the back ones as well
to change wheel bearings you will probably need a large hammer and a large
socket to undo the big nut in the middle of the hub and a crowbar to lever things about the only bit that can be a bit difficult is setting up the suspension angles afterwards but what you do is mark any bolts removed so they go back in the same position so your angles dont chenge
ttfn glenn

09-17-2007, 04:46 AM	#8 (permalink)
93fxdl Senior Member Join Date: Aug 2006 Location: kilmarnock Posts: 331 Drives: 07sedona lx 2000 nubira 74 beetle 86 cbr1000 honda 93 harley lowrider 78 transit camper! Gallery: 0	no if the bearing is gone you only need to change that one whilst you have the jack an stands out check the back ones as well to change wheel bearings you will probably need a large hammer and a large socket to undo the big nut in the middle of the hub and a crowbar to lever things about the only bit that can be a bit difficult is setting up the suspension angles afterwards but what you do is mark any bolts removed so they go back in the same position so your angles dont chenge ttfn glenn Last edited by 93fxdl : 09-17-2007 at 04:54 AM.