Thanks! Wow - 140,000km
Anyways, just finished replacing my rotors and pads on my '04 Sedona. Did not need rotors, but I got some drilled and slotted one's from a company in Los Angelos, CA. I had an impact driver, but my brother-in-law borrowed it a while back. I sure could of used it to remove the two set screws on the rotor. I stripped the screw slots on 3 of the 4 set screws and had to drill them off. Note, the internal hub material that holds the lug studs in place is not hardened steel. If you need to drill out the broken screws out, be careful not to elongate the threaded holes.
I took some pics, I will try to post soon.
Thanks,
-rob lee
|