I have also been looking at mods for the Amanti. Mine is an 04 Rosewood color. I have my windows tinted, headlight bulbs changed, 2 - 10" Infinity subs with an 800 watt Kenwood, no emblems, air intake. First off on the headlights they are H7 & H3. If you look close at the rubber boot around the headlight when you open the hood the numbers are stamped on it. I looked for a K&N air filter but they do not have a listing. I went to the local Auto Zone and asked them if I could check the dimensions of their K&N filters. They said yes and the one that is the closest is for the new Chrysler 300c Hemi. It is about a 1/4 off. I added 2 small pieces of metal to the inside of the stock air box with double sided tape and it fit perfect. If you look at the mass air flow sensor it has a grid and screen in it. These can be removed. It is supposed to flow about 20% more. Also just pass the MAF sensor there is a mushroom shaped part sticking out of the intake tube. This is supposed to quiet the noise. I removed it and taped over the opening and reinstalled it. This gives a smoother shot in. I also opened 3 holes in the bottom of the air box facing the fender well to draw more air. The car runs great and has a little intake sound. On the exhaust the car has a resonator just behind the converter. This will be removed. I am doing a cat back system with 2.5" pipe and a turbo muffler. A also have a set of 20" CABO rims ordered with 245/35/20 for them. My last project is to look into the lowing springs. I want to drive it for a while with the 245 tires to make sure they clear good before I lower it. I will try to post pictures once my wheels come in. I am also looking for a different grill.
__________________
Paul
04 Amanti
|